Once you have found the location of your designs, typically files with a. I use Windows Explorer to browse through my computer, but you may also access your designs through “My Computer”. I can’t tell you where they are, because you were the one that put them there. You will need to find your designs by navigating through your computer. Sometimes the designs are on CDs, and sometimes the designs are downloaded from the internet. Open up another window, and this time navigate through your computer to find the designs you want to transfer. Once you have the destination folder open, minimize that window by clicking the _ button in the upper right corner of the window.

For example, if you have an MC11000 or MC11000SE, you will be looking for an folder named EMBF that is inside a folder named EMB. The destination folder for your designs is shown in fig.1. When you have successfully navigated to the USB stick or CF card on your computer, you will notice the folders that your embroidery machine made. If you are lost at this point, you may require a lesson or two in basic computer usage, but this is beyond the scope of this blog post.

I would normally access the stick/card through “My Computer”, but you may also use Windows Explorer. We now want to open a new window and navigate through the computer to find the USB stick or CF card. Now plug your USB stick into your computer, or insert your CF card into the CF card reader of your computer. Finding Your Storage Device On Your Computer Once this message goes away, turn off the embroidery machine, and remove the card/stick. Normally you will see a message on the screen of your machine that tells you not to take the USB stick or CF card out for a little while. By doing this, your machine will create a necessary folder system on the stick/card, into which you will place your designs. Preparing Your Storage Deviceįirst, before doing anything else, stick your USB stick or CF card into your embroidery machine, then turn on the machine. The designs will then be recognized by your embroidery machine, and you will spend more time embroidering and less time wondering what is wrong. This tutorial is going to show you how to get your designs into the right folder on your USB stick or CF card. Unless the designs are placed into the right folder, the machine will not see that they are there, and you won’t be able to use them. I can’t blame them for not knowing this, because the owner’s manuals don’t make it very clear. The real problem is that the customer is not placing the design files into the correct folder on the USB stick or CF card.

Is something wrong with the USB stick or CF card? Is something wrong with the machine? No and no are always the answers to these questions. When I sell a Janome embroidery machine, the customer always comes back and says they can’t get their designs to their machine with their USB stick or CF card.

Janome digitizer dongle windows 10